Ratchet Lever Hoist

Coffing Lever Hoist

Lever Hoist – PA Model Ratchet by Coffing

Capacities & Lift – Rated loads of 3/4, 1, 1-1/2, and 3 Tons, with 5, 10, 15, and 20 foot standard lifts.
Rugged and Lightweight – Unit and handle made from high strength ductile aluminum alloy. Compact design increases portability and rigging efficiency.
Easy to Use – Double reduction gearing and short handle provide lowest handle effort in the Coffing line.
360° Rotating Handle – Provides versatile rigging options when used in confined spaces.
Easy Free Chaining – State-of-the-art free wheeling mechanism allows quick and easy one-handed take-up and positioning of slack chain.
Positive Load Control – Enclosed self-adjusting screw-and-disc type load brake stays clean and dry – eliminating drift and backlash for safe, sure holding. Screw-and-disc brake lowering allows “micro-inching” load positioning.
Low Maintenance – Hardened steel load chain provides high strength and resists wear. Alloy steel spur gearing is heat-treated for long life and is lifetime lubricated.
Lifetime Warranty

__________________________________________________________________________________________________

Capacities & Lift – Rated loads from 3/4 to 6 Tons, with 5-foot standard lift. (Other lifts available)
Rugged – Tough Aluminum alloy construction and powder coat finish. Weatherproof for outdoor service.
Construction – Simple construction with fewer parts for ease of maintenance and lower inventories. Hoistaloy hardened steel link type load chain for strength, long wear life and flexibility.
Braking System – Weatherized Weston-type automatic braking system for positive load control.
Operation – Easy, one-hand operation and control – only 58 pounds of pull required for 3/4 ton model capacity.
Hooks – Forged upper and lower hooks with latches standard. Upper and lower Latchlok hooks available for all capacities.
Free Wheeling – For fast and easy attachment to load.
Load Limiter – Optional Load Limiter protection device stops transmission of lever forces protecting against dangerous overload.
Options – Anchor Sling, Load Sentry, zinc-plated chain.
Lifetime Warranty

___________________________________________________________________________________________________

Capacities & Lift – Rated loads from 3/4 to 15 Tons. For standard lift, see chart below. Other lifts available.
Rugged – Unit and handle made from malleable iron. Riveted construction makes the unit tamper-resistant.
Free Chaining – Free chaining mechanism allows quick and easy take-up and positioning of slack chain. Hoist will not free chain when under load.
Handle Stops – Prevent handle from spinning if it is accidentally released by the operator.
Single or Double Locking Pawl Design
Multiple Rigging Options – Hoist can lift, pull, or bind. Can be operated from either side and will work in any position with equal efficiency.
Snap Hook and Link – Allows operator to convert unit to next smaller capacity to give longer lift and faster operation. Snap hook acts as an end stop and will not pass through chain sprocket.
Options – Bullard hooks, bronze hooks, and zinc plated hooks – consult Beaton Industrial
Lifetime Warranty

Capacity (lbs)	Model Number*	Standard Lift (in.)	Strands of Load Chain	Minimum Distance Between Hooks	Handle Length	Min. Increment	Avg. Handle Effort
1500	AG/AGI	56-1/2	1	13	18-3/4	.624/.313	56
3000	ATG/ATGI	57	2	15	18-3/4	.313/.156	60
3000	FG/FGI	56-1/2	1	16	27-5/8	1.0/.5	116
6000	FTG/FTGI	57	2	17-5/8	27-5/8	.50/.25	120
9000	ZG-4½	53	3	25	33-5/8	0.3333	124
12000	ZG-6	53	4	25	33-5/8	0.25	124
18000	WG-9	60	5	30	33-5/8	0.2	124
22000	WG-11	60	6	30	33-5/8	0.167	124
26000	WG13	60	7	30	33-5/8	0.143	124
30000	WG-15	60	8	30	33-5/8	0.125	124

___________________________________________________________________________________________________