Malta Dynamics Mobile Fall Protection

Why the XSERIES?

Leading Fall Protection Innovation

Since we began building mobile fall protection systems in 2015, we’ve developed more than a dozen models with continuous improvements. Each new design tackles evolving jobsite hazards, and our anchorage solutions continue to set the standard for safety and reliability.

Superior Overhead Anchorage

Impact forces, fall distances, and anchor heights optimize worker safety compared to foot-level connections. Overhead fall protection anchorage significantly reduces worker danger versus foot-level tie-offs, leading edge connections, or below D-Ring attachments.

Rapid Setup & Takedown

From truck to protection in minutes. XSERIES systems feature intuitive remote controls for fast, safe anchorage. Trained operators can be fully set up and disconnected from the vehicle in under five minutes, delivering immediate fall arrest protection.

X250

The X250’s anchor design ensures fall protection even when working near edges, with additional capabilities for confined space rescue and retrieval.

When used on a flat roof, it allows users to tie off directly overhead, significantly reducing swing fall and free fall distances, while also preventing lifeline cables from making contact with sharp edges. This enhances both safety and efficiency during use.

The X250 is equally effective for confined space rescue and retrieval, particularly when mounted over a trench box and paired with our R1000 rescue/retrieval kits (available in one or two-kit configurations).

Manufactured in an ISO-9001 certified facility in the USA, the X250 undergoes rigorous testing to meet and exceed OSHA anchorage standards, ensuring durability and reliability in challenging environments.

At Malta Dynamics, we pride ourselves on creating field-tested, field-approved products. The X250, like all our systems, is engineered to provide safe, simple, and user-friendly experiences. We understand the demands of the job site and deliver high-quality safety solutions that perform every time.

X360

The XSERIES X360 is an advanced, road-towable mobile fall protection system designed to accommodate two workers, providing overhead anchorage up to 34 feet 6 inches in height. Featuring a compact and revolutionary design, the X360 boasts a 360-degree rotating mast that allows for unmatched portability and precise positioning. This ensures that workers maintain optimal anchor point alignment without needing to reposition the entire fall protection system, even on dynamic job sites.

Engineered with a folding steel mast and synchronized hydraulics, the X360 extends from a height of 2 feet to full extension, delivering consistent fall protection at various heights. Its 360-degree rotation further enhances convenience, allowing workers to remain directly beneath the anchor point without needing to adjust the outriggers, making it ideal for projects requiring frequent movement or repositioning.

Manufactured in an ISO-9001 certified facility in the USA, the X360 exceeds OSHA fall protection standards and undergoes rigorous testing to ensure reliable, high-performance anchorage in the toughest environments. The electric-powered hydraulic system, complete with remote control operation, offers smooth, precise adjustments for optimal worker safety and efficiency.

X1270

The XSERIES X1270 is a versatile mobile fall protection system designed for two users, providing adjustable overhead anchor points up to 45 feet. Its road-towable design makes it an ideal solution for dynamic job sites, delivering flexible and efficient fall arrest or restraint coverage wherever you need it.

Featuring a folding steel mast with synchronized hydraulic controls, the X1270 allows for safe use at heights between 2 feet and 45 feet. Powered by a battery, the system can be set up quickly using manual outriggers, providing easy tie-off options and reliable protection for your team.

Manufactured in an ISO 9001-certified facility in the USA, the X1270 meets and exceeds OSHA standards for fall protection systems.

The compact design of the X1270 ensures rapid deployment on any roof, work area, or remote job site. The battery-powered system and manual outriggers allow your team to quickly position the unit, secure the base, and tie off without the need for heavy lifting equipment. This mobile fall protection system keeps your crew productive and safe with minimal setup time.

Whether you’re working on rooftops, construction zones, or industrial sites, the XSERIES X1270 provides reliable, flexible, and OSHA-compliant fall protection—without the delays or complexity of traditional systems.

X1260

The XSERIES X1260 by Malta Dynamics is a portable mobile fall protection anchor system designed specifically for the construction industry and elevated work areas. Supporting up to five users with portable anchor points, each rated for 310 lbs., the X1260 provides reliable overhead fall protection across a wide range of job sites.

Equipped with a 5-foot extendable mast, the X1260 allows one worker to tie off at a high-point anchor of up to 34 feet without the need for permanent installation. This makes it an ideal solution for flat roofs, parapet walls, and structural steel, adapting easily to the unique conditions of each job site.

Designed for fast and simple setup, the X1260 features a battery-powered system, manual outrigger jacks, and a portable base, allowing the unit to be repositioned easily across job sites without the need for heavy machinery. The system can be deployed quickly and efficiently, ensuring that workers can tie off and start their tasks without extended delays.

Manufactured in an ISO 9001-certified facility in the USA, the X1260 is rigorously tested to exceed OSHA requirements, providing dependable fall protection in the most demanding environments. As with all Malta Dynamics products, the X1260 is field-tested and field-approved, ensuring that it meets the real-world needs of construction crews and industrial teams.

Built for quick deployment, the X1260 allows workers to position the unit, secure the base, and tie off with minimal setup time. Whether on a roof, worksite, or remote job site, this mobile fall protection system ensures your team stays safe and productive without delays.

X1250

The XSERIES X1250 Mobile Grabber is a versatile, towable mobile fall protection system designed to deliver dependable overhead anchor points for up to three workers at height. Engineered to meet the demands of challenging jobsite conditions, the X1250 offers a safe, portable solution for overhead fall protection across multiple industries.

With an adjustable height mast extending up to 34 feet, the X1250 provides a high-reach anchor point for one worker. While the system features three total anchor points, only one can be used when the mast is fully extended to 34 feet, while the remaining two are intended for lower-height applications. Each anchor point supports a fall arrest capacity of 310 lbs., ensuring reliable, OSHA-compliant protection.

Manufactured in the USA at an ISO 9001-certified facility, the X1250 exceeds OSHA requirements for mobile fall protection systems. As with all Malta Dynamics products, the X1250 is field-tested and field-approved, providing a trusted solution for a wide range of job sites, including temporary work zones, construction sites, and plant maintenance areas.

The X1250’s compact and durable design makes it easy to deploy across rooftops, ground-level projects, or remote job sites. The adjustable mast and overhead horizontal lifeline eliminate the need for lifts or permanent tie-off points. To set up, simply secure the outriggers, position the unit, and tie off. The X1250 is engineered for simplicity, strength, and compliance, ensuring your crew stays safe and productive.

X1240

The XSERIES X1240 by Malta Dynamics is a portable fall arrest and mobile anchor system designed for construction and industrial environments, supporting up to two workers at 310 lbs. each. Its overhead anchor points deliver reliable fall arrest and restraint capabilities without permanent installation.

The X1240 moves easily across the jobsite with a compact, road-towable design. Setup is fast with manual outrigger jacks, while a rechargeable battery powers efficient, hassle-free deployment wherever overhead anchorage is needed. Manufactured in an ISO 9001– certified U.S. facility and tested beyond OSHA requirements, the X1240 delivers dependable, high-performance mobile fall protection crews can trust every day.

X1000

The XSERIES X1000 is a road-towable mobile fall protection system, engineered for two workers, providing overhead anchor points from 17 to 22 feet in height. Designed for fast deployment and portability, this compact system ensures reliable fall arrest and fall restraint capabilities on job sites where permanent anchorage isn’t available.

Operating with a manual hand-pump hydraulic system, the X1000 offers our most cost-effective mobile fall protection solution. Each anchor point supports up to 310 lbs., delivering OSHA-compliant overhead protection in environments where traditional anchorage is not an option. For those seeking enhanced convenience, the X1000E model features an electric-powered hydraulic system with remote control operation for effortless positioning.

Manufactured in an ISO-9001 certified facility in the USA, the X1000 is rigorously tested to meet and exceed OSHA fall protection standards. Its compact design allows for quick setup on roofs, work areas, or remote job sites, with adjustable outrigger jacks to position the unit and establish tie-off points efficiently. With dual overhead anchorage points, the XSERIES X1000 provides dependable fall protection without the need for extra lifting equipment, ensuring worker safety and operational efficiency.

X1000E

The XSERIES X1000E is an advanced road-towable mobile fall protection system designed for two workers, delivering overhead anchor points from 17 to 22 feet in height. This upgraded version of the X1000 features an electric-powered hydraulic system with remote control operation, offering enhanced convenience, speed, and ease of setup compared to the manual hand-pump system of the X1000.

Providing a reliable solution for fall arrest and fall restraint applications, the X1000E is perfect for dynamic job sites where permanent anchorage is unavailable. Each anchor point supports up to 310 lbs., ensuring OSHA-compliant overhead protection across a wide range of work environments.

Manufactured in an ISO-9001 certified facility in the USA, the X1000E meets and exceeds strict OSHA fall protection standards. Its compact design allows for quick and efficient setup on roofs, work areas, or remote job sites, while the electric hydraulic system with remote control makes positioning and adjusting the system effortless. The X1000E’s adjustable outrigger jacks provide stability, allowing your team to set up tie-off points in a fraction of the time, without the need for additional lifting equipment.

With the XSERIES X1000E, you get dependable mobile fall protection, streamlined deployment, and OSHA-compliant safety, ensuring that your crew stays safe and productive on the job.